It’s also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. 

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.

Specifications:

• Interior Dimensions (L x W x H):  9.4" × 7.4" × 5.5” | 239 x 188 x 140 mm
• Exterior Dimensions (L x W x H):  12.5" × 10.1" × 6.0” | 318 x 257 x 152 mm
• Lid Depth:  1.4″ | 36 mm
• Base Depth:  4.1″ | 104 mm
• Internal Volume:  383 cu.in | 0.22 cu.ft | 6.3 L
• Weight (empty):  3.3 lbs | 1.5 kgs
• Temperature Range:  Min -20°F (-29°C ) | Max 140°F (60°C)
• Material:  Lightweight NK-7 resin
• Max buoyancy:  17 lbs | 7.7 kgs
• Padlock Holes Diameter:  0.300"
• Airline carry-on:  Yes *

* Check with your airline carrier before travelling.

Warranty:

• Nanuk Limited Lifetime Warranty